ZACUTO Z-FINDPRO232 Z-FINDER PRO 2.5X F/3.2″ SCREENS

The Z-Finder Pro 2.5x for 3.2” screens is our standard Z-Finder Pro 2.5x packaged with a Z-Finder 3.2” Mounting Frame for Small Body DSLRs. This frame is compatible with small body cameras with 3.2” screens like the Canon 5D Mark IV and Mark III and the Nikon D800. This is not a new Z-finder.

The Z-Finder Pro 2.5x for 3.2” screens is an optical viewfinder that allows DSLR cameras to have the correct form factor for video. This Z-finder will magnify the LCD screen by 2.5x and has a diopter for specific focus tuning. It cuts out any extraneous light and offers an initial point of stability by pressing your eye against our comfy, large eyecup. The Z-finder Pro 2.5x for 3.2” screens comes with a 40mm diameter Zacuto optical designed lens, anti-fog coated protective covers, and a mounting system designed for 3.2” LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal points you can use the included Z-Finder Extender Frames. These are semi-permanent stackable frames that attach to the body of the Z-Finder Pro and extend the Z-Finder glass further away from the LCD screen for people who are farsighted.

The 2.5x magnification is recommended in particular for users who are near sighted and may have problems seeing long distances. The Z-Finder Pro 2.5x for 3.2” screens has a diopter range of -4.75 and up (unlimited with extender frames). This is the model we use with our electronic viewfinder packages.

The Z-Finder Pro attaches to your camera with the included Gorilla Plate V2 and Z-Finder 3.2″ Mounting Frame for Small DSLR Bodies. (The Z-Finder Mounting Frame can also be attached to our Mini DSLR Baseplate. ) The Gorilla Plate V2 attaches to the bottom of your camera using a ¼ 20” screw and has ¼ 20” screw holes underneath to attach a tripod plate. The metal Z-Finder Mounting Frame attaches to the Gorilla Baseplate using the provided red thumb screws. The Z-finder itself pops on and off the Z-finder Mounting frame. No magnets or glue are used. The metal Z-Finder Mounting Frame is backed with rubber to prevent scratching or slippage. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release.

WARNING The Z-finder is a magnifier and as such will magnify the sun and could damage the LCD screen if the sun is allowed to shine directly through the Z-finder lens. This is not a defect but a physical property.
Caution should be taken to avoid direct sun light. Proper use of the included lens cap and sun mask will dramatically reduce but not eliminate risk.